Mantis Bugtracker
  

LCD Display - Change Log


LCD Display - 2.06
==================
- 0000135: [Main Display] Add fuel temp to display for diesels (Peter)

LCD Display - 2.05
==================
- 0000132: [Adjustments] v2.04 firmware leaves buzzer on when it should be off for newer batch (slim) displays (Peter)
- 0000131: [Consult Interface] Firmware download is a bit slow (Peter)

LCD Display - 2.04
==================
- 0000092: [Main Display] Option to set speed correction as percent of what it is reading (Peter)
- 0000102: [Connecting] Diesel ECU support (Peter)
- 0000107: [Main Display] Remove sensors that arent supported (Peter)

LCD Display - 2.03
==================

Adds Adjustments whilst on main screen, Saves Long term trip statistics, TB45E support, changes main sensor screen slightly (temp to start second line, timing to end third line)

- 0000100: [Adjustments] allow adjustments whilst on main sensor/trip meter display (Peter)
- 0000098: [Options] Need to allow the second injector bank to be used in place of primary bank (Peter)
- 0000074: [Trip Meter] save trip meter statistics (Peter)
- 0000101: [Main Display] change main sensor screen slightly (Peter)

LCD Display - 2.02
==================

Adds Alerts and Adjustments

- 0000096: [Adjustments] adjustments of fuel/ignition (Peter)
- 0000064: [Alerts] audible alerts (Peter)
- 0000086: [Main Display] When ignition timing goes negative (ATDC) it displays negative value rather than degrees A (Peter)
- 0000088: [Main Display] Timing retard add to Max Values (Peter)

LCD Display - 2.01
==================

Fixes a few bugs in v2.00 firmware, and adds LCD refresh time option, Ignition timing offset for US users, MicroSD card info/speed test page

- 0000083: [USB/MicroSD] create microsd card info viewer page (Peter)
- 0000085: [Time Trials] timetrials only go up to the given speed in KPH, although they display MPH speed (Peter)
- 0000076: [Main Display] Slow pixel response on lcd display / Refresh rate (Peter)
- 0000082: [Time Trials] when using MPH, the individual time trial page shows kph still (Peter)
- 0000079: [Options] have timing offset option for US users (Peter)
- 0000077: [Time Trials] 400m and 0-160 time trials are mixed up (Peter)
- 0000075: [Options] extra % symbol at the end of the injector cc page (Peter)

LCD Display - 2.00
==================

Next major revision of the LCD display, different screen configuration (20x4), more compact size (fits in DIN slot), buttons on front, user upgradable firmware. Due around Q3 2008.

- 0000053: [Hardware] add buzzer to board (Peter)
- 0000048: [Hardware] Add microSD slot to board (Peter)
- 0000045: [Hardware] Change to switching power supply (Peter)

LCD Display - 1.0
=================

Next revision of the initial LCD display (40x2). Will receive trip meter screen in this firmware revision

- 0000043: [Options] Replace other economy option with MPG (Peter)


Software - Change Log

Software - 1.4.0
================

Next major version of ECUTalk


Software - 1.3.5
================
- 0000115: [Connection] attempt ED connection if EF fails (Peter)
- 0000119: [Connection] Support unlisted serial port names via ini file (Peter)
- 0000120: [Sensors] Add dec points to Height sensor (inches)/MPG (Peter)
- 0000117: [Fault Codes] In v1.3.5 beta3-beta6, code 55 (no errors) shows up as error (Peter)
- 0000114: [Logging] provide minimum log update functionality (Peter)
- 0000113: [Logging] Make log files .csv rather than .txt (Peter)
- 0000118: [Options] Remove confusing flush wait time option (Peter)
- 0000116: [Sensors] Support Active Suspension control unit (Peter)
- 0000018: [Sensors] Display switch/solenoid etc sensors (Peter)
- 0000111: [Fault Codes] Update error codes (for both petrol and diesel) (Peter)
- 0000110: [Sensors] differentiate between petrol/diesel (as some sensors are shared) (Peter)
- 0000108: [Options] russian language has trouble changing alert values (Peter)
- 0000105: [Logging] add extra sequential index column to logging (Peter)
- 0000003: [Gauges] User definable warning levels for sensors (visual + audio options) (Peter)
- 0000099: [Options] TB45E engine does not have bank1 injectors, swap with bank2 (Peter)
- 0000109: [Connection] add basic compatibility for diesels (Peter)

Software - 1.3.4
================

Next minor version

- 0000090: [Connection] Allow user to edit ECU ID for initialisation (Peter)
- 0000093: [Connection] COM10 and above dont work in ECUTalk (Peter)

Software - 1.3.3
================

Next minor version

- 0000069: [Gauges] attempt to get the LTRB bounds setting working for PPC users. (Peter)
- 0000058: [Gauges] pressing space bar while gauges displayed causes glitch (Peter)
- 0000070: [Options] default 100ms refresh is too high (Peter)
- 0000055: [Sensors] fuel usage (and maybe others) dont take into account hibernate/car off times for fuel usage calcs (Peter)
- 0000042: [Other] remove all console.writeline statements from beta4 for final 1.3.3 release (Peter)
- 0000041: [Gauges] If using L|T|R|B settings in the ini file, the gauges arent displayed properly if L is far from 0. (Peter)
- 0000010: [Gauges] Put font size/scaling for gauges in options (Peter)
- 0000038: [Connection] check for port open when reconnecting when gauges showing (Peter)
- 0000036: [Sensors] Clear trip statistics from sensors (Peter)
- 0000039: [Connection] Put option in for data flush wait time (this might help people with problems with sensors not showing up). (Peter)
- 0000035: [Sensors] Save long term trip sensor statistics (Peter)
- 0000032: [Fault Codes] When you read fault codes without having connected to ecu, ecutalk exits (Peter)
- 0000033: [Options] Gauge colour preview doesnt update till you restart ECUTalk (Peter)
- 0000037: [Options] Option dropdown lists are editable on laptop/PC (shouldn't be) (Peter)
- 0000024: [Sensors] Derived sensors should select dependent sensors automatically (Peter)
- 0000014: [Options] Add offset option timing so US users can get correct timing readings (Peter)
- 0000026: [Options] Priority option for ECUTalk (eg so mp3 etc play fine) (Peter)
- 0000005: [Sensors] Other Trip Meter Sensors (Fuel Used, Trip Fuel Economy, Trip Distance) (Peter)
- 0000022: [Options] imperial (etc) option in the options is cutoff with japanese font (Peter)
- 0000001: [Connection] Automatically attempt reconnection to ECU after connection lost (Peter)


Mantis 1.0.8[^]
Copyright © 2000 - 2007 Mantis Group
152 total queries executed.
150 unique queries executed.
Powered by Mantis Bugtracker