Commentary

0:00	When the display is turned on, the main sensor display is shown
0:04	The leftmost button is the "enter" button. It takes you to main menu from sensor display
0:06	The next button (in the middle), is the "left" or "plus" or "up" button.
0:10	The rightmost button is the right/minus/down button.
0:13	Fault codes will show up to 3 fault codes - in this example, i have a single faultcode
0:17	Clearing faultcodes will wipe it from the ECU, but it may instantly reoccur (as this did)
0:22	There are 4 time trials - the first 3 are speed governed, the 4th is distance (400m)
0:23	Each time trial, when selected, shows last time (not done yet), and best time
0:26	After you hit start, the time trial will start the next time the car speed is > 0
0:33	Clearing the best time (currently there is no best time, so visibly nothing happens)
0:40	There are 4 options, economy, speed, temp and tps units. More options for economy to come
0:59	You can see the changed options taking effect
1:12	You can see options again taking effect
1:17	Peak values for this session. These are lost when unit resets(power off, lost connection)
1:19	You can reset the peak values
1:37	You can see some awesome info about device/me. Eventually your 7 char id will be shown
1:49	To use integrated consult interface, move switch to right after optionally going to menu
1:59	When switched to consult interface, you can use only use option, peak, device info
2:03	Try one of the others, and the connection will fail - the unit reboots and goes to menu
2:21	After your switched back to left for lcd, you can use display/error codes/time trials